Assenmachers Bicycle Company

Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Whisky Parts Co. No. 7 Stem
$40.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Bontrager Comp Stem
$29.99
Proper fit on your bicycle isn't just for the pros. Swap out the old stock stem on whatever bike you ride for the adaptable Bontrager Comp alloy stem. - Construction: 6061-T6 forged and welded body - Removable 2-bolt face plate - Opposing 2-bolt steerer tube clamp - Corrosion-resistant steel bolts - Suitable for road or mountain use - Safe for use on carbon steerer tubes and handlebars - 50mm stack height
Syntace Megaforce 2
$99.00
Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high. - Stack height: 36mm - Weight: 132g (70mm)
Specialized Comp Multi Stem
$50.00
Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.
Bontrager Comp Stem
$29.99
The Bontrager Comp 31.8 stem is Blendr ready and provides a secure and confident connection to 31.8 handlebars for road, city, and mountain bikes. - 6061-T6 cast body construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp with M5 corrosion resistant steel bolts - Blendr ready for seamless accessory integration - Compatible with Blendr Elite bases and Blendr mounts - Suitable for use on a road, city, or mountain bike - Safe for use on carbon steerer tubes and handlebars
Bontrager Line Pro 35 0 Degree Stem
$99.99
An oversized 35mm stem that is lightweight and durable for the burliest mountain riders. Oversized and in control Equip your whip with this 35mm Line Pro stem and give yourself the oversized advantage. Forged from 6061-T6 3D aluminum, this finely finished stem provides the increased strength of the latest mountain-specific bar diameter at the lightest weight possible. Product details - Pro-level quality stem in oversized 35mm clamp diameter for increased strength and minimal weight - Forged from 6061-T6 3D aluminum - Laser etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Knock Block system protects the frame from impacts by fork and handlebars by eliminating over-rotation of bars - High-strength corrosion-resistant steel bolts ensure the freshest look for longer - Available in a wide range of sizes for today's mountain rider - Safe for carbon bars
ENVE M6 Mountain Stem 31.8mm
$280.00
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 31.8mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (40mm), 92g (55mm), 99g (70mm), 104g (85mm)
3T Apto Team Stealth
$110.00
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts (Titanium in case of the TEAM version) securely hold the stem in place.
Promax Banger Stem
$69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
Dimension 31.8mm Threadless Stem
$29.99 - $32.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
Profile Design Boa Threadless Stem
$27.99
Comfort is king when you dial in your riding position with Profile's Boa Threadless Stem. This light and durable welded-aluminum stem features a 20- to 40-degree rise and a secure two-bolt faceplate that makes installing the handlebars a breeze.
Zipp Service Course SL Stem
$112.00
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Dimension 26.0mm Threadless Stem
$29.99 - $32.00
Dimension 26.0 Stems - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Fully forged AL-6061-T6 - 4-bolt handlebar clamp - Weight: 140g-180g
Specialized S-Works SL Stem w/Expander Plug
$125.00
Specialized's S-Works SL Stem is sleek and lightweight. - 3D-forged and CNC-machined, 7075 aluminum road stem . - Includes expander plug for carbon steerer tubes and titanium hardware.
Ritchey Comp 4-Axis 30D Stem
$39.95
Pro caliber features at a real-world racer price. This 3D net forged 6061 aluminum stem offers +/- 30 degrees of stem angle for riders wanting a more comfortable fit. The angled steer tube clamp slot reduces stress on carbon steer tubes. - Material: 3D net forged 6061 - Angle: +/-30 degree - Steerer Height: 45mm - Steerer: 1-1/8” - Faceplate Width: 40mm - BB black finish - 170g (110mm)
Bontrager Kovee Pro 35 13 Degree Blendr Stem
$114.99
Strong, light, and capable An oversized 35mm clamp diameter MTB stem that offers increased strength and minimal weight The Kovee Pro 35 stem is the perfect centerpiece for cross country race bike. This lightweight stem is optimized for the latest XC mountain bike standard, with a 35mm clamp diameter that combines with a 35mm handlebar to provide a stronger, lighter system. - Oversized 35mm clamp diameter offers increased strength and minimal weight - 6061-T6, 3D, forged alloy construction - Laser-etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Knock Block system protects frame from impacts from over-rotation of bars and fork crown - Available in a wide range of sizes for today's mountain rider - High-strength, corrosion-resistant steel bolts - Approved for carbon bars
Easton EA50 Stem
$39.99
With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.
Ritchey WCS C220 84D Stem
$89.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Specialized Turbo Vado Stem w/Display & Light Mount
$65.00
Optimize your comfort and riding position on the Turbo Vado with this sleek stem. It's made from lightweight and durable 6061 aluminum, and it features both an integrated display and light mount. This way, you're able to dial in your fit without losing any of the readily accessible functionality or illumination that you love from the Vado.
Profile Design 1/ZeroSeven
$54.99 - $57.99
Simple, elegant, lightweight design can be run in negative or positive position for -7°/ 7° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 167g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±7°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 83° (±7°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm
Easton EA70 Stem
$64.99
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
3T Apto Pro
$70.00
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts securely hold the stem in place.
Origin8 X-Tra Lift Stem Riser
$35.99 - $39.99
Origin-8's X-Tra Lift Stem Riser is an adapter that lets you raise your handlebars and stem. It fits over and securely bolts to 1 1/8-inch forks to extend them. This gives you more height to raise your stem/bars. You use the included spacers to dial in the best fit. The Stem Riser is made from forged 6061 aluminum and is anodized for durability.
Origin8 Pro Fit Aluminum Ergo Stem
$29.99 - $38.00
- Steerer Diameter: 1" or 1-1/8" (includes shim) - Length: 70, 90, 110mm - Bar Clamp: 25.4 or 31.8 (includes shim) - Angle: +/- 35 degrees - Material: 6061 Aluminum - Shot-peen finish
Origin8 Flow MTB/Road Stem
$34.99
3-D forged AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design
Whisky Parts Co. No. 7 Mountain Stem
$40.00 - $45.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation
Origin8 Pro Fit Alloy Ergo Stem
$34.00 - $42.50
Origin-8's Pro Fit Alloy Ergo Stem is a great upgrade for road and mountain bikes. It's 3D forged from lightweight and durable 6061-T6 aluminum. It has a 4-bolt, 2-piece face clamp that shaves grams and makes for quick and easy handlebar installation/removal. Plus, the opposing steerer clamp bolts apply more even holding force to protect the fork and keep your bars from changing position.
FSA Omega Stem
$34.99 - $39.99
Dial in your perfect bike fit with FSA's Omega Stem. 3D-forged and CNC machined construction makes this stem stiff and light for power transfer and steering precision. The four-bolt faceplate holds bars securely, and this stem features stainless steel bolt hardware.
Sunlite Steel Touring Quill Stem
$15.99 - $18.99
• Steel • Polished-chrome finish • 1-inch model has 22.2mm quill, 15/16-inch model has 21.1mm quill • 10-inches tall (extra tall)
Specialized Mountain Stem
$50.00
This Mountain Stem from Specialized is CNC-machined, sleek and lightweight. - 3D forged and CNC-machined 6061 aluminume - 6-degree rise - Oversized 31.8mm handlebar interface - Compatible with composite handlebars
Origin8 xWerx 1-1/2-inch Threadless Stem
$39.99
- Aluminum 2014 3D Forged Stem - EN MTN safety certification - Designed for 1.5" steerer tubes - 4-Bolt face clamp - Clamp diameter: 31.8mm - Rise: +/- 7 degrees - Length: 90, 100mm - 155g
Sunlite Adjustable Threadless Stem
$35.99 - $36.99
Sunlite's Adjustable Stem adjusts from 0 to +60 degrees so that you can place your handlebars wherever they are most comfortable. It boasts light and durable aluminum construction with steel bolts. It fits on 1- and 1 1/8-inch forks and accepts 25.4mm- and 31.8mm-diameter handlebars too, with included shims. Plus, its 2-bolt clamp makes changing bars easy and holds fast.
Bontrager RXL 7 Degree Factory Overstock Stem
$40.00 $89.99 56% Off
A traditional, lightweight, alloy stem with increased compliance for road and MTB use. Light as carbon. Strong as hell. The super compliant 7050-T6 aluminum alloy Race X Lite bike stem is light enough for the road but strong enough for the mountain. It features a flip-flop 7 degree rise and 31.8 clamp that help it excel in lightweight versatility for a variety of hand positions. - 7050-T6, 3D, forged alloy construction - 4-bolt face plate helps distribute clamping load on ultra-lightweight handlebars - Angled steerer tube clamp spreads clamping pressure on steerer and is carbon friendly - Countersunk, corrosion-resistant steel bolts do not require washers - Dual clamp bolts are strategically positioned to evenly distributing clamping forces - This stem requires at least 5mm of spacers above and below the steerer tube clamp area - Go green and save green – Zero packaging means zero waste and zero extra cost
Bontrager Rhythm Comp Knock Block Stem-No Packaging
$49.99
Run your favorite 31.8mm clamping diameter handlebar on a bike with Knock Block with the Rhythm Comp 31.8. It adds Knock Block compatibility to a durable stem with multiple lengths to let you fine-tune the fit to your ride. Get 31.8mm handlebar compatibility with your Knock Block system;Also compatible with standard headsets and spacers;Knock Block system protects frame from impacts by fork and handlebars by eliminating over-rotation of bars;Available in a wide range of sizes for today's mountain rider;See Service Parts for other Knock Block parts;
Ritchey WCS Carbon Matrix C220 84D Stem
$159.95
You really can have it all-the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Stack: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
ENVE Aero Road Stem
$300.00
An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise. - Material: Carbon - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 42.5mm with length shim / 45.5mm with angle shim - Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm - Torque Spec, Steer Tube: 5.5Nm
Fizik Cyrano R1 Stem
$120.00
Stems need to be light, simple, and rock solid. Fizik checked all the boxes with their Cyrano R1 Stem. The Cyrano stem forms an integral part of Fizik's Spine Concept fitting technology. A four-bolt face plate provides excellent torsional stiffness, and the choice of lengths and angles ensures that your perfect fit is out there.
Sunlite Alloy 2-Bolt Quill Stem
$24.99
• Forged aluminum • Classic streamlined shape • 2-bolt clamp • 180mm tall
Sunlite ATB/Urban Quill Stem
$25.99
• Forged aluminum • Anodized finish • 2-bolt clamp • 150mm tall
Race Face Turbine Stem
$93.99
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 31.8 mm - Stem Angle: -84 deg , +96 deg
Zipp Service Course SL-OS Stem
$132.00
Zipp's Service Course SL-OS Stem provides lightweight strength and versatility to help you achieve the perfect riding position. At only 140 grams, the Service Course keeps your rig light while maintaining toughness for the long haul. Change the angle of the stem quickly and easily with the included shim that lets you tailor your comfort even more. And, the Service Course works with both 1 1/8-inch steerers and 1 1/4-inch. • Included shims allow the stem's rise to be adjusted to 4°, 6°, or 8° angles.
Zipp Service Course Stem
$55.00
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Origin8 Ultim8 Quill Stem
$52.99
- Lightweight forged aluminum construction - Hidden 2-bolt face clamp - EN Road safety certified - Compatible with 1-inch steerer (22.2mm internal diameter) - Length: 90mm, 110mm, and 120mm lengths - Bar clamp diameter: 26mm - Stem angle: -17 degrees - Steerer length: 140mm
Chromag HiFi
$99.00
Chromag's HiFi stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 200 grams - Low stack height
Ritchey Classic C-220 Stem
$69.95
You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
TruVativ Descendant Stem
$65.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Colors: Black - Material: Al-7075 - Lengths: 40mm, 50mm, 60mm - Bolts: Steel - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Spank Oozy Trail Stem
$75.00
All Mountain strength and stiffness...trail tuned! Spank Industries' OOZY Trail Stem offers all the performance and confidence of a gravity stem, in a highly weight-sensitive, trail-tuned geometry package. 3D-forged and CNC weight-optimized, the OOZY Trail stem comes in popular lengths, with an ultra-short stack height and true zero degree rise. Chamfered barclamps reduce stress risers in the critical bar/stem interface, and ultra-light spacer and sealed top-cap (included), make set-up a breeze. The OOZY Trail Stem's characteristic hourglass sectional profile and wide stance enhance torsional stiffness and integrates beautifully with modern frame designs. Weight, performance, aesthetics and great value...the OOZY Trail Stem has it all. - Key technologies: MGR, chamfered bar clamp, "Snap Fit" sealed top cap - Material: 3D Forged MGR Alloy, CNC Weight Optimized - Length (mm): 50 / 65 / 75 - Rise (mm): 0 - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): +-150 (50mm) / +-170 (65mm) / +-180 (75mm) - Finish: Shot Peen anodized, CNC/Laser etched logos
Promax S-29 Stem
$69.99
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
Ritchey WCS Trail 35 Stem
$94.95
More than just a beefed-up version of Ritchey's other stems, the WCS Trail 35 stem features their patented C220 clamp fits a wide variety of riser bar bends and still packs a dramatic increase in stiffness and strength over competitors' designs. The 35mm clamp diameter takes advantage of the increased stiffness and power of larger diameter handlebars. - 3D Forged 2014 alloy for superior strength and lightweight - 220 degree, extra-wide bar clamp improves stiffness and fits most riser bars - Oversize 35mm bar clamp for use with 35mm OD handlebars - Material: 3D Forged 2014 alloy - Rise: 0° - Stack Height: 45mm - Faceplate Width: 40mm - 130g (70mm)
Promax DA-1 Stem
$69.99
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
Velo Orange Tall-Stack Stem
$40.00
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
Syntace Flatforce Stem
$119.00 - $139.00
The Syntace Flatforce stem utilizes a 12mm drop for all length options, allowing riders to keep their MTB handlebars in a lower riding position. - 200° clamp face increases handlebar strength and fatigue life - 42mm wide bar clamp for increased handlebar support - Super-low handlebar position solution for unique fit requirements - Sabertooth bar clamp design insures no bolts or clamping surfaces protrude - Stack Height: 27mm
Odyssey 6 Piece Stem Bolt Set
$3.99
The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.
Sunlite Threadless Alloy Road Stem
$27.99
- 3D forged 6061 alloy road stems in 6 or 17 degree angles - Lightweight 4 bolt faceplate - Material: AL6061-T6 - Finish: Sandblasted
FSA SL-K Stem
$81.99
The updated SL-K stem is lighter than ever – just 141g for the 100mm length. Using high-strength 2014-aluminium and sophisticated forging and machining, FSA finely controls the amount of material used to cut weight. - 3D forged and CNC machined AL-2014 - Carbon fiber faceplate - Chromoly hardware
TruVativ Stylo T20 Stem
$40.00
TruVativ's Stylo T20 stem is 3D forged for that perfect balance of light weight, stiffness and control on the trail. Four bolts securely attach the face plate and make changing out handlebars a breeze.
Ritchey SuperLogic C-260 Carbon Stem
$269.95
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
Origin8 Classic Sport Quill Stem
$19.99
Origin-8's Classic Sport Quill Stem is crafted from light and durable forged 6061 aluminum with chrome-plated steel bolts. The handlebar clamp bolt is hidden for a clean look. Different lengths are available for customizing the reach to your handlebars. This sweet stem is 180mm tall from the bottom of the bolt to the top of the stem so that you can raise and lower your bars, too.
Origin8 Classique Sport MTB Stem
$23.99
Origin-8's Classique Sport ATB Stem is crafted from light and durable forged aluminum. It features a 2-bolt handlebar face clamp for easy bar installation and removal. And it even has a built-in brake cable stop. This stem is 180mm tall from the bottom to top of the quill bolt so that you can raise and lower your bars (the bolt is hidden inside the vertical part of the stem). This is a nice choice for that classic mountain or touring bike.
Bontrager Speed Concept Stem
$86.50
Make sure your fit is dialed in your race against the clock! Bontrager's Speed Concept Stem allows you to set up your Speed Concept bike for proper ergonomics and aerodynamics. Plus, the precisely integrated design keeps your super aero bike fast and looking pro! - Low-Near = 17° rise / 77mm length - Low-Far = 100° rise / 110mm length - Mid-Near = 50° rise / 67mm length - Mid-Far = 45° rise / 110mm length - High-Near = 80° rise / 67mm length - High-Far = 75° rise / 110mm length
Page 1 of 3 Next page